Sparco QRT Performance, BK mounts, Sparco Belts

[DRLane]

BIMMERPOST / Classifieds

Asking Price:

USD 2,850.00

Item Interest

Posted in E9X forum, but interchangeable here.

I'm going to keep pushing this car in the solely track specific direction. Ditching the passenger and replacing the driver seat with Racetech containment 4119.

So it's really a feeler for now but I could remove everything immediately if someone was interested in package. Otherwise I'll break it up and part out over the winter months. I can or will add detailed pictures as parts come off.

2x Sparco QRT Performance Seats. Minimal to no wear. Includes the Recaro vinyl bolster protection.

Seat Mounts:
Driver: BK Direct to floor mount (low and direct feedback for driver)
Passenger: BK side mount on OEM powered sliders. Wired and ready for immediate plug and play. Can include the yellow seat connector.

Harness Mounts:
BK Sub strap bars for each side
Passenger side floor mount that attaches to the seat belt floor retention bolt.
Passenger side lap mount on the slider.

BK quick release fire extinguisher mount.

Sparco 6 pt harness 3"/2" Steel
Sparco 6 pt harness 3" Steel

Market Rates:
Seats, $1350 each = $2700
Fixed Mounts: $208
Slider Mount: $208
Lap mounts $90
Sub Straps: $104 each = $200
Extinguisher Mount: $379
Belts: $700
Total: $4,485

I'd sell as a bundle for $2,850.

You cover shipping and PP fees. I would package everything really well to protect your purchase! Check my itrader to feel secure about the transaction.

[Ethan2232]

Originally Posted by DRLane

Posted in E9X forum, but interchangeable here.

I'm going to keep pushing this car in the solely track specific direction. Ditching the passenger and replacing the driver seat with Racetech containment 4119.

So it's really a feeler for now but I could remove everything immediately if someone was interested in package. Otherwise I'll break it up and part out over the winter months. I can or will add detailed pictures as parts come off.

2x Sparco QRT Performance Seats. Minimal to no wear. Includes the Recaro vinyl bolster protection.

Seat Mounts:
Driver: BK Direct to floor mount (low and direct feedback for driver)
Passenger: BK side mount on OEM powered sliders. Wired and ready for immediate plug and play. Can include the yellow seat connector.

Harness Mounts:
BK Sub strap bars for each side
Passenger side floor mount that attaches to the seat belt floor retention bolt.
Passenger side lap mount on the slider.

BK quick release fire extinguisher mount.

Sparco 6 pt harness 3"/2" Steel
Sparco 6 pt harness 3" Steel

Market Rates:
Seats, $1350 each = $2700
Fixed Mounts: $208
Slider Mount: $208
Lap mounts $90
Sub Straps: $104 each = $200
Extinguisher Mount: $379
Belts: $700
Total: $4,485

I'd sell as a bundle for $2,850.

You cover shipping and PP fees. I would package everything really well to protect your purchase! Check my itrader to feel secure about the transaction.

So these would be plug and play in an M4?

[DRLane]

Originally Posted by Ethan2232

So these would be plug and play in an M4?

Not sure - The plug would be the passenger side and I'm guessing the plug (powering the slider) itself is different in the E9X than f8x but the insert into the housing is likely similar. I'll do some research.