10-15-2017, 10:29 PM | #1 |
Enlisted Member
24
Rep 33
Posts |
Support for GTS/ZCP related coding
Hi guys,
Hope I don't get banned because of this post I seen this section of the forum being supported to help us newbie or people that want to learn and share how to code or flash our car. I am surprise to see when it come to GTS TCU, Diff, and Steering are such a popular topic. it become business opportunity, the instruction cannot be share.... which is disappointing. I have to agree, no expert in identify all this coding or how to, which I would think this is what this forum is about. Feel free to disagree as I am just trying to figure out the reason behind this as I love to DIY but not able to find all the requirement to do this.... Ex. I can see we can VO code GTS steering to reduce the dead zone issue which I am interested But there are no full information of what to do 1. Change the chassis to F82 GTS 2. VO code --> But I am not sure which module to VO code. 3. any chance we know which value has changed so that after VO code, we can verify to make sure it has been coded successful Sorry in advance if i will disappoint anyone, but just sharing my thoughts Thanks Gilbert |
Appreciate
7
Rid3r121.50 ryank382102.00 Lytics12.00 Mikecom32149.50 Vectors2final1356.50 backagain345.00 hatepotholez292.50 |
10-31-2017, 06:25 PM | #2 |
Captain
441
Rep 891
Posts |
I am also interested in this as I want to learn how to do this myself.
|
Appreciate
1
Killed by Death12464.00 |
10-31-2017, 09:09 PM | #3 |
BTC maxi
222
Rep 1,124
Posts |
for GTS steering it's my understanding that you need to FA code Typenschlüssel = 4S93 / entwicklungbaureihe = F082 then VO code EPS. i have not done this myself as i don't feel i have enough seat time in my 2018 zcp. someone can correct me if i am wrong.
|
Appreciate
0
|
11-01-2017, 01:45 PM | #5 |
Major General
2374
Rep 8,364
Posts |
Change Chassis to F082 (not GTS).
Change Typecode to US or EU version of M4 GTS EPS - Steering GHAS - Differential VDC - EDC |
Appreciate
3
|
11-03-2017, 08:34 PM | #6 |
Boner
89
Rep 249
Posts |
|
Appreciate
0
|
11-08-2017, 10:40 PM | #10 |
Enlisted Member
24
Rep 33
Posts |
Thanks at least we have information on Steering, diff and EDC hahah
I guess the GTS TCU is more steps as it needs to be software flash, but hoping there are more insight on this hehehe Gonna try to do the diff and steering tonight and see if there are any difference |
Appreciate
0
|
11-08-2017, 10:43 PM | #11 |
Enlisted Member
24
Rep 33
Posts |
One more stupid question, as my car is F80 and still under warranty
I wonder if it is possible that I do the changes to F082 and VO code those module. When I am done, and I just edit the FA again back to F80 and save it. Will i still keep the previous VO module coded to the GTS. was thinking if this can be done, it save my hassle when i bring my car into service |
Appreciate
0
|
11-08-2017, 10:54 PM | #12 | ||
Major General
2374
Rep 8,364
Posts |
Quote:
Quote:
|
||
Appreciate
1
FSociety3812.50 |
11-09-2017, 03:13 AM | #13 |
Private
16
Rep 52
Posts |
Great, i was looking for someone to do all these for me as I do not know what was involved. For HK and Macao I believe Typenschlüssel should be 4S92 (All asia F8x have 2 at the end), Euro being 4S91 and US being 4S93.
TCU = DSC Meaning what remains is DSC + ICM + ABS (Needs flashing?) Last edited by Celesabc; 11-09-2017 at 03:21 AM.. |
Appreciate
1
gspannu199.50 |
11-09-2017, 09:16 AM | #14 | |
BTC maxi
222
Rep 1,124
Posts |
Quote:
i was under the impression that when i VO code that it uses the file that is written to VCM, am i wrong in thinking this? |
|
Appreciate
0
|
11-09-2017, 11:09 AM | #15 | |
Major General
2374
Rep 8,364
Posts |
Quote:
Correct. Just use modified and loaded FA. If you write to VCM, especially something like this, you will have trouble when going to dealership or accidentally VO coding wrong modules (eg, DME). |
|
11-09-2017, 01:33 PM | #16 |
Brigadier General
1254
Rep 4,088
Posts |
I'm assuming that you first need to be updated to the latest I-step, or at least the first one that included ZCP, in order for the coding to actually work. Am I wrong?
|
Appreciate
0
|
11-10-2017, 08:17 AM | #19 |
Private
16
Rep 52
Posts |
I just coded GHAS, DSC and ICM no error other than tpms stopped working probably tpms from gts is different.
Anyone know the type code for BMW CS? Thanks Cel Last edited by Celesabc; 11-10-2017 at 08:28 AM.. |
Appreciate
2
ahgil23.50 hatepotholez292.50 |
11-10-2017, 08:43 AM | #21 |
Enlisted Member
24
Rep 33
Posts |
DSC is that the transmission, and do you mind what u did to it as I always have the impression it needs to be flash
|
Appreciate
0
|
11-10-2017, 08:51 AM | #22 |
Private
16
Rep 52
Posts |
I believe DSC is Traction control.
Modify fa (Change type code to gts, change build date to 0717) , write modified fa, then code above modules, write original non gts fa back. For DCT you need to flash, I already did that via bootmod3. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|