THE LARGEST BMW 2-SERIES FORUM ON THE PLANET
2Addicts
2Addicts
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
2Addicts | BMW 2-Series forum Technical Topics N55 (M235i) Engine, Transmission, Exhaust, Tuning New F-Series Downpipe for the M235! BMW Changes design as of 07/13 Build!

Post Reply
 
Thread Tools Search this Thread
      03-21-2014, 08:59 AM   #1
Mike@N54Tuning.com
Joint Chiefs of Staff
Canada
4901
Rep
115,955
Posts

Drives: 2007 335i, 2015 M3
Join Date: Dec 2008
Location: N54tuning.com

iTrader: (89)

New F-Series Downpipe for the M235! BMW Changes design as of 07/13 Build!

I have had a few questions and wanted to let you guys know that your new M235s have a new design 4.0" down pipe. BMW changed the configuration on 07/13 so all cars built after that date have the new 4.0" design.

******

I got ER to put together a breakdown of the different configurations of downpipes that BMW has put out. In true BMW fashion they decided to change things up mid model, mid year to make life more difficult for us

Thanks to Fred and Christine over at Evolution Racewerks for putting this together.

Both versions of these downpipes are now in stock so you can PM or email me if you are interested in getting a set. We have set up the site with a drop down menu so you can select your model year accordingly. If there is any doubts about which pipe you have you can always send a pic of the down pipe area and we can help identify the model.

*******



The F Series (1,2,3,4 Series) N55 cars all share the same downpipe. When first introduced, the downpipes had a 3.5" v-band flange inlet on the turbocharger side. On 07/13, BMW decided to change the downpipe. This new downpipe featured a 4" v-band flange inlet instead. Thus, the previous downpipes are not compatible with the new ones.

Below is the breakdown on which downpipe to chose based on production date:

335i (U.S. Spec) - Up to 07/13 have the old downpipe (BM-EXH007) 3.5"

After 07/13 have the new downpipe (BM-EXH012) 4.0"

435i (U.S. Spec) - All 435i have the new downpipe (BM-EXH012) 4.0"

M235i (U.S. Spec) - All M235i have the new downpipe (BM-EXH012) 4.0"

M135i (European Spec) - Up to 07/13 have the old downpipe (BM-EXH007) 3.5"

After 07/13 have the new downpipe (BM-EXH-012) 4.0"

IF THE VEHICLE IN QUESTION IS BUILT ON 07/13, IT CAN HAVE EITHER DOWNPIPE. A VIN# CHECK SHOULD VERIFY WHICH DOWNPIPE IT IS. TO BE ABSOLUTELY SURE, A VISUAL INSPECTION NEEDS TO BE DONE. SINCE THE FACTORY PART# ON THE DOWNPIPES ARE DIFFICULT TO SEE, THE BEST WAY TO CHECK IS TO LOOK AT THE PART# ON THE BRACKET HOLDING THE DOWNPIPE. THE OLDER DOWNPIPES HAVE 2 STUDS GOING INTO THE BRACKET AND ATTACHED BY 2 NUTS. THE NEWER DOWNPIPE HAS 1 STUD ON TOP ATTACHED BY A NUT. THE BOTTOM BRACKET IS ATTACHED WITH A BOLT, NOT A NUT.
Appreciate 0
      03-21-2014, 05:49 PM   #2
CSM3
Captain
CSM3's Avatar
United_States
130
Rep
645
Posts

Drives: E86 Z4M, F80 M3CS
Join Date: Sep 2011
Location: MA

iTrader: (8)

Good to know! thanks mike! will be placing an order when and if i can get my car!!

Cheers.

Quote:
Originally Posted by Mike@N54Tuning.com View Post
I have had a few questions and wanted to let you guys know that your new M235s have a new design 4.0" down pipe. BMW changed the configuration on 07/13 so all cars built after that date have the new 4.0" design.

******

I got ER to put together a breakdown of the different configurations of downpipes that BMW has put out. In true BMW fashion they decided to change things up mid model, mid year to make life more difficult for us

Thanks to Fred and Christine over at Evolution Racewerks for putting this together.

Both versions of these downpipes are now in stock so you can PM or email me if you are interested in getting a set. We have set up the site with a drop down menu so you can select your model year accordingly. If there is any doubts about which pipe you have you can always send a pic of the down pipe area and we can help identify the model.

*******



The F Series (1,2,3,4 Series) N55 cars all share the same downpipe. When first introduced, the downpipes had a 3.5" v-band flange inlet on the turbocharger side. On 07/13, BMW decided to change the downpipe. This new downpipe featured a 4" v-band flange inlet instead. Thus, the previous downpipes are not compatible with the new ones.

Below is the breakdown on which downpipe to chose based on production date:

335i (U.S. Spec) - Up to 07/13 have the old downpipe (BM-EXH007) 3.5"

After 07/13 have the new downpipe (BM-EXH012) 4.0"

435i (U.S. Spec) - All 435i have the new downpipe (BM-EXH012) 4.0"

M235i (U.S. Spec) - All M235i have the new downpipe (BM-EXH012) 4.0"

M135i (European Spec) - Up to 07/13 have the old downpipe (BM-EXH007) 3.5"

After 07/13 have the new downpipe (BM-EXH-012) 4.0"

IF THE VEHICLE IN QUESTION IS BUILT ON 07/13, IT CAN HAVE EITHER DOWNPIPE. A VIN# CHECK SHOULD VERIFY WHICH DOWNPIPE IT IS. TO BE ABSOLUTELY SURE, A VISUAL INSPECTION NEEDS TO BE DONE. SINCE THE FACTORY PART# ON THE DOWNPIPES ARE DIFFICULT TO SEE, THE BEST WAY TO CHECK IS TO LOOK AT THE PART# ON THE BRACKET HOLDING THE DOWNPIPE. THE OLDER DOWNPIPES HAVE 2 STUDS GOING INTO THE BRACKET AND ATTACHED BY 2 NUTS. THE NEWER DOWNPIPE HAS 1 STUD ON TOP ATTACHED BY A NUT. THE BOTTOM BRACKET IS ATTACHED WITH A BOLT, NOT A NUT.
Appreciate 0
      03-21-2014, 05:52 PM   #3
kerm1t
Captain
167
Rep
926
Posts

Drives: 17 M3 ZCP Stage 2
Join Date: Jul 2013
Location: San Francisco

iTrader: (0)

good post. since a member asked me for parts, maybe this might be helpful to others.

BMS already released JB4 and intake for the 2 series. It's been confirmed as well that f30 parts transfers over to the f20 series as well.

ER+BMS also has charge pipe for f2x.

Versus, Supersprint has both DP and Exhaust. As well as Competition who has 4" DP for f2x.
Appreciate 0
      03-22-2014, 01:54 AM   #4
ska///235i
***** noob
ska///235i's Avatar
United_States
1354
Rep
10,479
Posts

Drives: 325xi>M235i>428GCx Mspor
Join Date: Sep 2005
Location: Boston

iTrader: (34)

Garage List
2006 325xi  [0.00]
is the 4" DP the reason for the more aggressive sound?
Appreciate 0
      04-03-2014, 06:27 PM   #5
h0pe
New Member
0
Rep
27
Posts

Drives: M235i
Join Date: Mar 2014
Location: FL

iTrader: (0)

anymore info on this?
Appreciate 0
      04-03-2014, 06:32 PM   #6
cmkde
Private First Class
36
Rep
104
Posts

Drives: Alpine White 15' M4
Join Date: Mar 2014
Location: Vegas

iTrader: (0)

Quote:
Originally Posted by h0pe View Post
anymore info on this?
You can check some of Justin's threads, he has the ER installed with other supporting mods, this DP from what we already know is true 4" diameter unlike the Super Sprint model which seems to taper off from what I've been told.

Seems to be cheaper too. I should have one arriving soon and will post some additional info when I can, possibly a DIY as well.
Appreciate 0
      04-03-2014, 07:10 PM   #7
JustinCredibleM
Second Lieutenant
47
Rep
287
Posts

Drives: '15 GT-R, '02 996TT
Join Date: Mar 2014
Location: Las Vegas, NV | San Diego, CA

iTrader: (0)

Quote:
Originally Posted by cmkde View Post
You can check some of Justin's threads, he has the ER installed with other supporting mods, this DP from what we already know is true 4" diameter unlike the Super Sprint model which seems to taper off from what I've been told.

Seems to be cheaper too. I should have one arriving soon and will post some additional info when I can, possibly a DIY as well.
Yesssss
Appreciate 0
      04-05-2014, 07:47 PM   #8
rwalker
Major
United_States
330
Rep
1,084
Posts

Drives: the wheels off
Join Date: Nov 2006
Location: San Diego, CA

iTrader: (1)

there's a group buy on these going on over in the F30 section...

http://www.f30post.com/forums/showthread.php?t=968171

Last edited by rwalker; 04-05-2014 at 08:12 PM..
Appreciate 0
      04-09-2014, 10:51 AM   #9
Mike@N54Tuning.com
Joint Chiefs of Staff
Canada
4901
Rep
115,955
Posts

Drives: 2007 335i, 2015 M3
Join Date: Dec 2008
Location: N54tuning.com

iTrader: (89)

Quote:
Originally Posted by cmkde View Post
You can check some of Justin's threads, he has the ER installed with other supporting mods, this DP from what we already know is true 4" diameter unlike the Super Sprint model which seems to taper off from what I've been told.

Seems to be cheaper too. I should have one arriving soon and will post some additional info when I can, possibly a DIY as well.
Yes the ER ones are true 4" Best ones on the market!! We've actually had a lot of M235 guys recently getting them.

Mike
Appreciate 0
      05-13-2014, 12:12 AM   #10
harkes
Colonel
harkes's Avatar
China
1072
Rep
2,351
Posts

Drives: M135i, E39 M5, NSX and AE86
Join Date: Apr 2014
Location: Xiamen, China

iTrader: (0)

Any dyno results with the ER DP?
Appreciate 0
      05-13-2014, 06:46 PM   #11
kerm1t
Captain
167
Rep
926
Posts

Drives: 17 M3 ZCP Stage 2
Join Date: Jul 2013
Location: San Francisco

iTrader: (0)

Quote:
Originally Posted by harkes View Post
Any dyno results with the ER DP?

yes, search!
Appreciate 0
      05-13-2014, 07:25 PM   #12
JustinCredibleM
Second Lieutenant
47
Rep
287
Posts

Drives: '15 GT-R, '02 996TT
Join Date: Mar 2014
Location: Las Vegas, NV | San Diego, CA

iTrader: (0)

Quote:
Originally Posted by harkes View Post
Any dyno results with the ER DP?
I have one up in my thread.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:03 AM.




2addicts
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST