OFFICIAL GROUP BUY: BMWLogger by **************

[flipm3]

BIMMERPOST / Classifieds

Asking Price:

USD 19.00

Item Interest

Official Group Buy for BMWLogger Data Logging Software for MSS60 DME
I wasn't entirely sure where the best place was to post this. I figured since this section of the forum revolves around Engine Parts For Sale, this would be most fit. Moderators, if you feel this to be more appropriate else where, feel free to relocate.

Many of us are starting to explore different avenues in pulling out power from our cars. In my opinion, to maximize power and to measure safe gains, data logging is an integral part of the journey. Running our cars on the dynos seem to be a common trend these days, but as many know, it only shows a small part of the story. This led me to researching in ways of affordably logging data on the road and track.

Acquiring a means of logging data gives us the ability to see what are cars and DMEs are actually doing in real life conditions, not just simulation on dyno rollers in a very controlled environment. This information could even possibly be sent to different tuners for review in case of revamping one's tune or set of modifications.

I have looked over many different tools and often times, were way above my budget. Finally, I stumbled upon a very nice program, BMWLogger by **************. Priced at an incredible rate, when paired with a proper OBDII-USB cable, one can easily monitor and log data.

The software has notable features such as:

• Read and Clear DME Fault Codes
• Clear Adaptations
• Real-Time Datalogging of different parameters (IAT, Ignition Advance, RPM, VANOS, etc)
• Record, Save, and Load Data for Review
• Export data to CSV

Here is a short tutorial video going over the interface of the software.

Here is the link to the ************** website:
http://**************.com/BMWLogger-2

After speaking with the software developer of BMWLogger, he offered a nice opportunity for the E9X M3 Community to join in on a Group Buy.

The software is already priced at a friendly $49. In addition, all you need is a compatible OBDII-USB Cable. If Group Buy commences, I will try to collate some good sources for compatible cables. Rest assured, if we can get a handful of individuals to commit, the price of the software will lower to cover some of the cost in investment in a cable.

Pricing Break Down Based Upon Committed Buyers
Original Price : $49
1 - 4 : $39
5 - 9 : $29
10 - 19 : $24
20+ : $19 - CURRENT PRICING

Group Buy Participant List
1. flipm3 - PAID
2. mkPOTO
3. LostMarine - PAID
4. edwinm3 - PAID
5. signes - PAID
6. urBan_dK - PAID
7. M3SQRD
8. dngo - PAID
9. e92zero - PAID
10. kerrit
11. elim11
12. Edmbimmer88
13. 1sikbmr - PAID
14. lacartus
15. Sticky - PAID
16. BrenM3
17. casual_gamer
18. aussiem3
19. em5464 - PAID
20. italyix
21. WayneM3 - PAID
22. casual_gamer - PAID
23. Sean05
24. longuyen88
25. THE_TECH - PAID
26. img - PAID
27. akh23456 - PAID
28. slowfast - PAID
29. GMW
30

Payment Information
Since we hit 20 anyone on the list who wants to submit their payment can do so to Sales@**************.com. Include a separate email with your forum name, license file, and paypal transaction ID. If you're not sure how to collect your license data please watch the tutorial video. In an effort to extend this to anyone who may not have seen the thread yet I'd like to keep the group buy open to any new MSS60 guys until Sunday, 01.27.2013.

Please PM me when you have paid, so I can keep record.

[signes]

Payment sent. Will send the other info later tonight once I can download on my home computer.

[casual_gamer]

I've paid via paypal: 5L96120225402852V
For ease could someone let us all know where the license extraction video is, and what time the instructions start?

Thanks.

[Grail05]

Add me paying later im in bed lol

[longuyen88]

I'm in

[THE TECH]

What the heck, add me.

[smooth1]

Originally Posted by casual_gamer

I've paid via paypal: 5L96120225402852V
For ease could someone let us all know where the license extraction video is, and what time the instructions start?

Thanks.

It's the video in this thread, first post, and on the product page this thread links to.

[smooth1]

I've noted you late additions. I'm sure he'll update the official list as well. Thanks for the support!

[flipm3]

Hehe...LIST UPDATED!!!!

Everyone, don't forget to send ************** a separated email with all the information he requested.

Forum Name, License File, and Paypal Transaction ID to Sales@**************.com

Thanks again!!

[THE TECH]

I'm in no rush to get the license. Is it ok to make payment and worry about the license later?

[flipm3]

Originally Posted by THE TECH

I'm in no rush to get the license. Is it ok to make payment and worry about the license later?

I'm sure it won't be a problem. That might be something to clarify with ************** though. Keep us posted on what he says, as I'm sure there might be a few in a similar scenario.

Thanks THE TECH!

[Grail05]

Originally Posted by flipm3

I'm sure it won't be a problem. That might be something to clarify with ************** though. Keep us posted on what he says, as I'm sure there might be a few in a similar scenario.

Thanks THE TECH!

would you happen to have a link on what or where we can get a cable to would work for this software?

[THE TECH]

Originally Posted by Sean05

would you happen to have a link on what or where we can get a cable to would work for this software?

We can supply you with the cable, just let me know.

[flipm3]

Originally Posted by Sean05

would you happen to have a link on what or where we can get a cable to would work for this software?

Originally Posted by THE TECH

We can supply you with the cable, just let me know.

Beat me to it! I was just going to recommend contacting THE TECH at BPMSport

[Longbow64]

Tech, I have both of your cables (for coding and tuning). Which cable works with this software?

[THE TECH]

Originally Posted by Longbow64

Tech, I have both of your cables (for coding and tuning). Which cable works with this software?

You need to use the coding cable.

[THE TECH]

Originally Posted by flipm3

I'm sure it won't be a problem. That might be something to clarify with ************** though. Keep us posted on what he says, as I'm sure there might be a few in a similar scenario.

Thanks THE TECH!

I decided to brave the cold of the garage and get it done.

[Trevor .:R]

Can I still do the group buy?..

[smooth1]

Yes, it's still going until Sunday.

[Longbow64]

Originally Posted by THE TECH

You need to use the coding cable.

Thanks, I'm glad you didn't say I needed a different one. Right now I have the coding cable, the tuning cable, the F-series coding cable, and a BT cable.

[THE TECH]

Originally Posted by Longbow64

Thanks, I'm glad you didn't say I needed a different one. Right now I have the coding cable, the tuning cable, the F-series coding cable, and a BT cable.

Sounds like you're good to go in the cable department.

[smooth1]

Originally Posted by Longbow64

Thanks, I'm glad you didn't say I needed a different one. Right now I have the coding cable, the tuning cable, the F-series coding cable, and a BT cable.

That's a lot of cables.