|
|
01-18-2013, 03:35 PM | #1 |
Private
8
Rep 60
Posts |
Rear Bumper defect?
All,
Is it a known defect/design flaw for the f10 are any other bmw plastic rear bumper to not be flush where the tips of the bumper meet the panel above the rear tyres? Is your bumper like this and was it so from new? |
01-21-2013, 01:49 AM | #5 |
Major General
1397
Rep 8,083
Posts |
Mine don't....
__________________
Ian
Current: 2021 G21 330i M-Sport Previous: 2018 A6 Avant S-Line MMI+, 2014 F31 320d M-Sport, 2013 F10 520d M-Sport, 2011 F10 530d M-Sport, 2008 320i M-Sport Coupe, 2002 325i, 2001 318i valvetronic, 1998 318i, 1996 525i, 1990 Porsche 944S2 |
Appreciate
0
|
02-13-2013, 07:52 AM | #6 |
Right Responsible
58
Rep 1,646
Posts |
I had this exact problem on the side of the fuel filler. The pointy bit of the bumper basically stuck out too far. I got it replaced under warranty.
I suspect that it may have been overfilling the car and allowing diesel to run down the side caused the plastic to deform and bend out. I now make sure never to go beyond the first click when filling the car. The dealer has had to replace one other F10 bumper with the same problem (Omagh, N.Ireland)
__________________
Last: 330cd Sport - Silver Grey, 335d M Sport Coupe, F10 535d M Sport.
Current: AW F21 M135i, Coral Red, Pro Nav, Vis, HK, & Clunky Adaptive Suspension Current: F15 X5 XDrive 40d M Sport - Space Grey, lots of toys. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|