|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
6FL USB Retrofit Installed - But don't get any power to usb-port
|
|
03-19-2012, 08:21 PM | #1 |
New Member
6
Rep 21
Posts |
6FL USB Retrofit Installed - But don't get any power to usb-port
Hello
I have installed 6FL USB retrofit kit to my car, BMW E91 320d -2008 I have professional radio. I bought the retrofit kit new and a MULF2 Hi unit from ebay. The MULF2 was sold as new and uncoded. Now when I have installed everything and done the coding. But i'm not sure coding is right done. I can not program the MULF2 Hi because I only have USB k+D-can cable. I don't get any power to my USB-port (5v). I have meassured with a voltmeter and can see that itīs 0v on 3pins and 0,2v on one pin in the USB-port. I have also meassured incoming cables to the USB-hub, and I got 12V on power pins. On the incoming usb cable that come from the MULF2 unit, I have 5v on one pin and 0V on the rest (3pins). Anyone have any clue what can be wrong here? Is the USB-hub broken? (because I have 5v on incoming cable and 0v on outgoing)? Or is it still something in codeing that does the USB-port deactive? |
03-19-2012, 10:33 PM | #2 |
Lieutenant
46
Rep 541
Posts |
Best guess is that something didn't get a proper connection. MULF should have some default coding--even if brand new. Does it show up in INPA (functional jobs/information)?
|
Appreciate
0
|
03-20-2012, 06:10 AM | #3 | |
New Member
6
Rep 21
Posts |
Quote:
And I got this from Most/CAN Gateway Radio: |
|
Appreciate
0
|
03-20-2012, 07:45 AM | #4 |
New Member
6
Rep 21
Posts |
USB IS NOW WORKING!
I changed production date in VO to #1114 I also added this to the VO: -KMP3, -IPOD Then I did a reprogram for 2RAD. But have not tested IPOD functionality yet.... Anyone now if it is any disadvantage to change VO production date from #0308 to #1114 ? |
Appreciate
0
|
Bookmarks |
|
|