ModMyNav kit missing fuse for power

dilankk · 03-17-2012, 07:30 PM

Hey Guys,

hoping someone can help me figure out what fuse and amperage I need for this.

Was doing the install today and couldn't figure out why the unit was not powering up. I opened up the inline fuse holder and there was no fuse inside. My car is in pieces I'd really like to wrap this project up

Also, anyone that has done the install.. The original idrive video wire that comes down how did you route it to avoid interfering with the vent open/close mechanisms?

Thanks,
D

stratplaya06 · 03-18-2012, 10:45 AM

2 Amps

Asked Kris about this a few months back

dilankk · 03-19-2012, 01:22 PM

E-mailed Kris and he sent me back this info
Please use 3A 250V size fuse.

Install is all done, had some issues with the cabling but all is well now. If anyone needs pointers feel free to send me a PM

03-17-2012, 07:30 PM	#1
dilankk Private First Class 6 Rep 105 Posts Drives: 2007 335i E93 AW/CR Join Date: Feb 2011 Location: CA iTrader: (1)	ModMyNav kit missing fuse for power Hey Guys, hoping someone can help me figure out what fuse and amperage I need for this. Was doing the install today and couldn't figure out why the unit was not powering up. I opened up the inline fuse holder and there was no fuse inside. My car is in pieces I'd really like to wrap this project up Also, anyone that has done the install.. The original idrive video wire that comes down how did you route it to avoid interfering with the vent open/close mechanisms? Thanks, D Last edited by dilankk; 03-17-2012 at 08:59 PM..
	Appreciate 0 Tweet Quote

03-18-2012, 10:45 AM	#2
stratplaya06 Captain 46 Rep 967 Posts Drives: 2008 E92 335xi-SOLD 5.0 Miata Join Date: May 2008 Location: Maryland iTrader: (10)	2 Amps Asked Kris about this a few months back __________________ \| PROcede Rev3 \| Vishnu Meth \| DCI \| BMW Perf. Exhaust \| AR Coated/Catless \| CP-E FMIC \| Quaife \|
	Appreciate 0 Quote

03-19-2012, 01:22 PM	#3
dilankk Private First Class 6 Rep 105 Posts Drives: 2007 335i E93 AW/CR Join Date: Feb 2011 Location: CA iTrader: (1)	E-mailed Kris and he sent me back this info Please use 3A 250V size fuse. Install is all done, had some issues with the cabling but all is well now. If anyone needs pointers feel free to send me a PM
	Appreciate 0 Quote