[luckstr]

Have a 2017 440i convertible. Had it coded to do some things when car was newer (2 years ago). I am having the lens of the instrument cluster replaced ( fogged up inside) and the lens itself cannot be replaced, they are replacing entire cluster (under warranty), which means they will be re-setting car back to factory settings at some point during replacement. I know all previous coding will be wiped out and I have already made arrangements to have coding re-done by the same people who originally did it (they are charging me only $50 for this), but my question(s) are:
1. Will this re-setting affect things such as;
a. Driver profile(s)
b. Music stormed on hard drive (about 125 CD's)
c. The 8 memory buttons
d. Anything impacting telephone(s) set up
e. Anything else I have not mentioned

Thanks

Luckstr

[atzebmw]

a. Driver profile(s) Not sure - I think NO
b. Music stormed on hard drive (about 125 CD's) No
c. The 8 memory buttons Yes
d. Anything impacting telephone(s) set up Not sure - I think NO
e. Anything else I have not mentioned Consumption in on-board computer, Average speed, transmission adaptions ...

[cfm56d7b]

Driver profiles can be exported to USB drive and later imported.

Helpful thread ...

https://f30.bimmerpost.com/forums/sh....php?t=1238593

[luckstr]

Originally Posted by atzebmw

a. Driver profile(s) Not sure - I think NO
b. Music stormed on hard drive (about 125 CD's) No
c. The 8 memory buttons Yes
d. Anything impacting telephone(s) set up Not sure - I think NO
e. Anything else I have not mentioned Consumption in on-board computer, Average speed, transmission adaptions ...

FYI. Had to re-pair phone(s) after vehicle re- programmed!

[IAmATeaf]

I’ve also had my seat memory settings go as well after a full update.