E90 323i LCI 08

Adrianhk · 12-20-2018, 07:36 AM

Hi guys,

My door cannot be locked, can anyone help me what is the problem and how to fix it.

The actuator seems working but struggling to lock it.

Thx

designguy96 · 06-20-2019, 08:36 AM

I actually just made a post about a similar issue. My lock is doing the same rapid lock/unlock, but mine stops in the locked position and won't unlock.

https://www.e90post.com/forums/showthread.php?t=1624625

I replaced my actuator and the issue was resolved, but now a few months later the issue is back with the new actuator. I've had it come and go too. All my fuses look ok and I don't have any error codes. I'm thinking there has to be something with the wiring or a module somewhere, but I'm unsure how to test. I guess the actuator could have gone bad again, but then what is causing my actuators to go bad.

If I figure it out I'll let you know, but you may want to follow my thread as well.

12-20-2018, 07:36 AM	#1
Adrianhk Registered 0 Rep 1 Posts Drives: BMW E90 323 08 Join Date: Dec 2018 Location: Hong Kong iTrader: (0)	E90 323i LCI 08 - Driver's door lock problem. Hi guys, My door cannot be locked, can anyone help me what is the problem and how to fix it. The actuator seems working but struggling to lock it. Thx
	Appreciate 0 Tweet Quote

06-20-2019, 08:36 AM	#2
designguy96 Enlisted Member 8 Rep 41 Posts Drives: 2009 328i SportWagon XDrive Join Date: Apr 2017 Location: Syracuse, NY iTrader: (0)	I actually just made a post about a similar issue. My lock is doing the same rapid lock/unlock, but mine stops in the locked position and won't unlock. https://www.e90post.com/forums/showthread.php?t=1624625 I replaced my actuator and the issue was resolved, but now a few months later the issue is back with the new actuator. I've had it come and go too. All my fuses look ok and I don't have any error codes. I'm thinking there has to be something with the wiring or a module somewhere, but I'm unsure how to test. I guess the actuator could have gone bad again, but then what is causing my actuators to go bad. If I figure it out I'll let you know, but you may want to follow my thread as well.
	Appreciate 0 Quote