[jalami]

It is possible to retrofit used 6wb instrument panel???

[KingpinRCR]

Is it possible? Yes
Is it costly? Yes
Does it require a lot of work? Yes
Does it work 100%? Not sure, doubt it...

[rflagg]

http://f30.bimmerpost.com/forums/sho....php?t=1256383

[atzebmw]

I wonder that there is already used 6WB.
6WB was introduced only about 3 months ago for F3x.

http://www.f30-forum.de/board30-haen...eo/?highlight=

[jalami]

I bought a used one
I have to put km to 0 and clean Vin.
Investigating I am.

[atzebmw]

Originally Posted by jalami

I bought a used one
I have to put km to 0 and clean Vin.
Investigating I am.

Is it for F30 or F10?
If it has less mileage than your car, then it adapts itself automatically.
If it has more mileage than your car, then the mileage has to be deleted.
The vin can be changed by coding.

[jalami]

Is for f30
6wb for f30

[Lancelot]

Originally Posted by atzebmw

Is it for F30 or F10?
If it has less mileage than your car, then it adapts itself automatically.
If it has more mileage than your car, then the mileage has to be deleted.
The vin can be changed by coding.

How do you change mileage or VIN? is it with ESYS?

[atzebmw]

Originally Posted by Lancelot

How do you change mileage or VIN? is it with ESYS?

Yes with E-Sys.
All data (mileage + VIN) will be taking over if you hit the button code.

[Lancelot]

Ok so installing is
- remove cluster
- put in new cluster
- open esys and hit "code"
That's it?

[atzebmw]

I never did this retrofit.
But normally it should work like this.
Maybe before coding you have to inject a new CAFD (detect caf for swe).

[hanselfransel]

Originally Posted by Lancelot

Ok so installing is
- remove cluster
- put in new cluster
- open esys and hit "code"
That's it?

No that will not work with a used 6WB,
if its used you have to reset/delete VIN with special tools for 35160 eprom .
If someone have the correct hardware to reset the eprom nice , after that you can write new VIN with ESys Flash and code.
As i know there a eproms on 6WB that can be deleted on board with R270,Codiprog,Enigma but there is one which is very difficult (don tknow exactly the number)
So search for someone who can reset your 6WB.

With new 6WB you can surely flash code directly with Esys