[abc54089408]

My 328i headlight washer pump broke. How do i disconect it?

[jkwhar]

If you're talking about the pump on the fluid tank, it should just pop-in/pressure fit.

http://www.realoem.com/bmw/enUS/show...diagId=61_2896

[abc54089408]

Originally Posted by jkwhar

If you're talking about the pump on the fluid tank, it should just pop-in/pressure fit.

http://www.realoem.com/bmw/enUS/show...diagId=61_2896

Hi, thanks for replying, I just want to cut the pipe on the headlight washer, not the windshield one, am I able to do that?

[jkwhar]

Originally Posted by abc54089408

Hi, thanks for replying, I just want to cut the pipe on the headlight washer, not the windshield one, am I able to do that?

Oh I misread your original post. The tube runs on the passenger side right along the bottom of your headlights. There is a quick disconnect closer to the headlight washer nozzle.

[abc54089408]

Originally Posted by jkwhar

Oh I misread your original post. The tube runs on the passenger side right along the bottom of your headlights. There is a quick disconnect closer to the headlight washer nozzle.

Originally Posted by jkwhar

Oh I misread your original post. The tube runs on the passenger side right along the bottom of your headlights. There is a quick disconnect closer to the headlight washer nozzle.

Hi, how do i disconnect it?

[jkwhar]

Originally Posted by abc54089408

Hi, how do i disconnect it?

If you look along the line, closer to the nozzle, theres a blue sleeve. If you look closer to the blue sleeve, you should see what looks like a 'spring', but not a metal one. slide the blue sleeve towards the "springy" side and pull.

[MrMarvin]

Are you going to remove it permanently or replace it?

If you are going to do remove it permanently, simply disable it with coding. Way easier!