[jyjimenez3]

OK well a week ago i got into a accident and wrecked my hood and front bumper. Long story short i went to my local bmw junk yard and picked up this hood to replace the other one. After i just finished wrapping it i noticed that the front hangs over the head lights a bit much!! is there anyway to fix this any suggestions would be great !!!

[Zajac1]

Originally Posted by jyjimenez3

OK well a week ago i got into a accident and wrecked my hood and front bumper. Long story short i went to my local bmw junk yard and picked up this hood to replace the other one. After i just finished wrapping it i noticed that the front hangs over the head lights a bit much!! is there anyway to fix this any suggestions would be great !!!

local bmw junk yard ?? where's that ?

[Sco Cuddie]

Looks like you got an E92 hood for an E90? Or vise versa? That's probably your issue

[jyjimenez3]

Originally Posted by Zajac1

local bmw junk yard ?? where's that ?

lmao a place called project m in jersey

[jyjimenez3]

Originally Posted by Sco Cuddie

Looks like you got an E92 hood for an E90? Or vise versa? That's probably your issue

i saw them take it off an e92. plus doesnt the e90 hood have a silver trim towards the end of the hood?

[Zajac1]

Originally Posted by jyjimenez3

lmao a place called project m in jersey

I heard about them. Send message for them twice on fb with no answer

[jyjimenez3]

Originally Posted by Zajac1

I heard about them. Send message for them twice on fb with no answer

yea they are assholes. some of them are cool but if it involves removing a bumper or something they will tell u know becuase they dont want to do the work -_-

[ssdara]

Who installed your hood? It adjusts left and right and front and back once you LOOSEN the 4 nuts, think 10-14mm, holding it up on the brackets.

You have hood stops in your radiator support bar that turn either direction to affect closing gap.

You also have the two hood catch brackets on left and right of the front of the hood that adjust up and down, affecting closing gap.

[jyjimenez3]

Originally Posted by ssdara

Who installed your hood? It adjusts left and right and front and back once you LOOSEN the 4 nuts, think 10-14mm, holding it up on the brackets.

You have hood stops in your radiator support bar that turn either direction to affect closing gap.

You also have the two hood catch brackets on left and right of the front of the hood that adjust up and down, affecting closing gap.

thanks so much good info!!! where are the hood stops located on the radiator ?

[MsportFury]

Originally Posted by ssdara

Who installed your hood? It adjusts left and right and front and back once you LOOSEN the 4 nuts, think 10-14mm, holding it up on the brackets.

You have hood stops in your radiator support bar that turn either direction to affect closing gap.

You also have the two hood catch brackets on left and right of the front of the hood that adjust up and down, affecting closing gap.

+1