New Ytest
Sign out
Bimmerpost
Login
BMW E39 5-Series Forum | 5Post.com
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read  
Go Back   BMW E39 5-Series Forum | 5Post.com > BIMMERPOST Universal Forums > Classic BMW (Pre-2005 Models)

Post Reply
 
Thread Tools Search this Thread
      01-02-2022, 02:12 PM   #1
ylafont
New Member
8
Rep
5
Posts

 
Drives: BMW X5 E53
Join Date: Jan 2022
Location: NY

iTrader: (0)

ISTA - No Communincation

Greetings all,
New to the forum and was wondering if anyone can guide me in solving in what I think is a communication issue. Thank you in advance!

Vehicle
BMW x5 E53 – 2003

I got a hold is ISTA an to see if I can solve, why I have Traction-ABS-Brake and Check Engine Lights are on. ABS module was rebuilt 4 months ago.


Items verified

  • ISTA Communication setting on (COM 1)
    Com 1 settings
    Latency = 1
    Speed - 115200
    Fuses #2 and #52 (Diagnostics Plug), have are good.
    K-DCAN – Tested.
    ODB2 – Connector. Verified that pin 8 was connected and made a good connection to k+DCAN Cable.
    INPA looks like it can read the engine

ISAT is not able to identify the vehicle or read the modules.

ISTA Messages
  • The Vehicle could not be identified Successfully. Check vehicle Interface and 'PAD Active.
  • The Vehicle identification number could not be determine from the vehicle.

Not sure what next needs to be checked. please advise, thank you again.
Appreciate 0
      03-02-2022, 08:17 PM   #2
firediver
New Member
firediver's Avatar
0
Rep
10
Posts

 
Drives: BMW F25 X3 2011 - 35i - N55
Join Date: Mar 2022
Location: Medellín

iTrader: (0)

I've heard about certain ISTA/CABLE compatibility issues with models prior to 2013, but I don't recall the details nor the solutions, sorry.
Appreciate 0
      04-05-2022, 12:37 PM   #3
Krychool
E36 fan
Krychool's Avatar
Poland
11
Rep
9
Posts

 
Drives: E36 & F48
Join Date: Apr 2022
Location: Poland

iTrader: (0)

Hello, try to connect your car with inpa
Appreciate 0
      04-09-2022, 05:23 PM   #4
manija
Enlisted Member
Lithuania
3
Rep
31
Posts

 
Drives: ex E61, ex E91, F11 525d LCI
Join Date: Apr 2022
Location: LT

iTrader: (0)

there could be few versions of Ista with different requirements and different features.
please clarify what Ista you use.
Appreciate 0
      12-05-2022, 06:56 PM   #5
tasa
New Member
tasa's Avatar
0
Rep
22
Posts

 
Drives: BMW M4
Join Date: Mar 2021
Location: ESPAÑA

iTrader: (0)

Hello I am from Spain I have the g80 of 2021 and ista does not communicate does not detect terminal 15
Appreciate 0
      01-23-2023, 08:33 AM   #6
sgsdownhill
New Member
sgsdownhill's Avatar
20
Rep
15
Posts

 
Drives: F10 M5
Join Date: Nov 2022
Location: Nevada

iTrader: (0)

Quote:
Originally Posted by manija View Post
there could be few versions of Ista with different requirements and different features.
please clarify what Ista you use.

This was the issue myself and friends always ran into. Tried multiple installation source files till I found one that works. Was not always same installer with car model, ie E46 vs E92.

Good luck. Can be a big pain
Appreciate 0
      01-23-2023, 09:52 AM   #7
BzsBimmer
Major General
BzsBimmer's Avatar
3237
Rep
6,707
Posts

 
Drives: '23 G80 FO M3, M3 & MY Tezzy's
Join Date: Mar 2006
Location: Nor. Cal

iTrader: (32)

Check you connection in settings>VCI Config and select “Yes” for “Ethernet as preferred communication channel when connected via ICOM?”

I had same issue or similar and that’s what my fix was. Not sure what cable setup you got. I was using cable with Ethernet to USB adapter.
Appreciate 0
      01-26-2023, 08:24 PM   #8
bimmerg38
New Member
bimmerg38's Avatar
48
Rep
11
Posts

 
Drives: BMW
Join Date: Jul 2022
Location: 75037

iTrader: (0)

Here are two tutorial videos for enet wifi adapter and esys compatibility with ista. I hope this helps.

Appreciate 0
      02-13-2023, 07:58 PM   #9
Raimo5
First Lieutenant
174
Rep
357
Posts

 
Drives: BMW 740d xDrive (G11)
Join Date: Feb 2023
Location: Estonia

iTrader: (0)

Quote:
Originally Posted by BzsBimmer View Post
Check you connection in settings>VCI Config and select “Yes” for “Ethernet as preferred communication channel when connected via ICOM?”

I had same issue or similar and that’s what my fix was. Not sure what cable setup you got. I was using cable with Ethernet to USB adapter.
As he is trying to access E53, I assume he is using K-DCAN cable, if not ICOM. For K-DCAN cable, you must select 'Ediabas default settings (ediabas.ini)' under interface type. In ediabas.ini config file, the interface should be set to 'Interface = STD:OBD'. In the same folder where ediabas.ini is located, there is also obd.ini subconfiguration file. Make sure that Port is set to 'Com1', Hardware is 'USB' and retry is 'ON'. That is of course if you are using K-DCAN.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 12:15 PM.




5post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST