What's that? You wanna chit chat? Welcome to the whore thread!

[Axius]

Originally Posted by 1MOREMOD

Hey I resemble that remark

It should be guns and bullets.

[silvergray545]

1MOREMOD Have you ran Liqui-Moly or Ravenol in your E46? Rumor has it, they run cooler than the factory oil.

[nyalpine90]

since weather is gettin nicer, did a quick walk around the car and notice tiny orange specs on the rear hatch & bumper smh.

do i need a professional detail or can i tackle this myself?

[///M Power-Belgium]

Originally Posted by anglo

One bad hombre.

EDIT:
My friend the dude is not a hombre , he's from the religion of terror bombs
Of course made in Belgium !

[///M Power-Belgium]

Originally Posted by Axius

It should be guns and bullets.

And beers..

[silvergray545]

Originally Posted by nyalpine90

since weather is gettin nicer, did a quick walk around the car and notice tiny orange specs on the rear hatch & bumper smh.

do i need a professional detail or can i tackle this myself?

https://www.amazon.com/Carpro-Iron-R.../dp/B004UM6DLE

[Aatish]

Originally Posted by nyalpine90

since weather is gettin nicer, did a quick walk around the car and notice tiny orange specs on the rear hatch & bumper smh.

do i need a professional detail or can i tackle this myself?

Clay and/or IronX.

[nyalpine90]

thanks guys

[UncleWede]

Originally Posted by nyalpine90

since weather is gettin nicer, did a quick walk around the car and notice tiny orange specs on the rear hatch & bumper smh.

do i need a professional detail or can i tackle this myself?

bees shaking off too much pollen

[nyalpine90]

Originally Posted by UncleWede

bees shaking off too much pollen

they are vicious

[Mr Tonka]

Originally Posted by Aatish

Clay and/or IronX.

The jack ass plumbers who fixed my issue after the car ran into our back flow control valve had to paint the new concrete bollards safety yellow. They did so when a northernly wind was blowing the overspray towards my vehicle. Just had it cleaned today and it's covered in yellow overspray. Sent the owner of the plumbing company an email with pictures of the overspray, the spray can the guy left on my property as well as the pictures my (on point) warehouse guy took of the plumbers when they were spraying, showing the spray heading straight towards my car.

We'll see how much he'll pay for the fix....

[nyalpine90]

Originally Posted by Mr Tonka

The jack ass plumbers who fixed my issue after the car ran into our back flow control valve had to paint the new concrete bollards safety yellow. They did so when a northernly wind was blowing the overspray towards my vehicle. Just had it cleaned today and it's covered in yellow overspray. Sent the owner of the plumbing company an email with pictures of the overspray, the spray can the guy left on my property as well as the pictures my (on point) warehouse guy took of the plumbers when they were spraying, showing the spray heading straight towards my car.

We'll see how much he'll pay for the fix....

I would be spitting fire

[Aatish]

Originally Posted by Mr Tonka

The jack ass plumbers who fixed my issue after the car ran into our back flow control valve had to paint the new concrete bollards safety yellow. They did so when a northernly wind was blowing the overspray towards my vehicle. Just had it cleaned today and it's covered in yellow overspray. Sent the owner of the plumbing company an email with pictures of the overspray, the spray can the guy left on my property as well as the pictures my (on point) warehouse guy took of the plumbers when they were spraying, showing the spray heading straight towards my car.

We'll see how much he'll pay for the fix....

Guy doing the painting needs to reevaluate his life.

Clay should take most off...but most likely will cause marring on the paint too...Get a quote for a full detail and send it as well.

Had something similar happen a year ago, except with dust from cutting marble. Caked my car. Guy tried to hose it off...ended up thickening it up. Spent a Sunday in the garage and cleaned the mess. Got a quote from a detailer friend and sent to stone guy.

He doesn't cut onsite anymore...

[RJ_]

Warehouse guy was definitely on point. Good hire, boss Tonk.

[The Choosey begger]

How's Ambryonix doing today?

[Mr Tonka]

Originally Posted by RJ_

Warehouse guy was definitely on point. Good hire, boss Tonk.

He and I grew up in the import car scene here in Tampa before there was an import car scene. I was driving an 85 supra and he in a 240sx coupe. We'd roll out to the street racing spots and people driving nothing but mustangs, corvettes, and premiered muscle cars would look at us like we were crazy. Many of them learned the value of lb/hp as both cars were well modified.

Before he worked here, he used to be an import export guy buying and selling from US & Australia to Japan and vs versa.

[Mr Tonka]

Originally Posted by nyalpine90

I would be spitting fire

Maybe in the past. Hardly worth it anymore.

[///M Power-Belgium]

Originally Posted by Mr Tonka

The jack ass plumbers who fixed my issue after the car ran into our back flow control valve had to paint the new concrete bollards safety yellow. They did so when a northernly wind was blowing the overspray towards my vehicle. Just had it cleaned today and it's covered in yellow overspray. Sent the owner of the plumbing company an email with pictures of the overspray, the spray can the guy left on my property as well as the pictures my (on point) warehouse guy took of the plumbers when they were spraying, showing the spray heading straight towards my car.

We'll see how much he'll pay for the fix....

Sucks , sounds like a real mess.

[///M Power-Belgium]

Originally Posted by anglo

How's Ambryonix doing today?

What Ambryonix ? Think you mean *Ambiorix* my friend ?
Your Ambryonix sounds almost like a fucking embryo while he's the beast from BC !

My day in short..
Well Ambiorix started his day today at 4:30 AM , 11 hours later he came home with his head full of miserie .
New assy robot really sucked and damaged the CommScope fiberglass connectors (new gen.) by the speed of the handlings.
The Japanese want this speed because they need to deliver xxxxx connectors for the end of this month and tomorrow is the end of the month !
So I had to re-design a new robot handling to maintain the requested speed (cycle-time) but without damage ...
And meanwhile there is a microscopic recheck for the finished connectors !

The sucker is working for the moment alone in the dark , and I hope to see tomorrow morning the connectors without damage ..
They called me already 8 times in the last 7 hours because knowledge is required even for the microscopic quality check in every 15 minutes...
Hope they don't call me tonight or in my night , because the sucker crashed a few times !

So yeah Ambiorix has work stress even when he's not on the battlefield !

[RJ_]

Craigslist has a forum section...holy shit is it the wild west in there.

[M3 Number 86]

Originally Posted by RJ_

Craigslist has a forum section...holy shit is it the wild west in there.

Link! Lol

[Mr Tonka]

Originally Posted by Aatish

Guy doing the painting needs to reevaluate his life.

Clay should take most off...but most likely will cause marring on the paint too...Get a quote for a full detail and send it as well.

Had something similar happen a year ago, except with dust from cutting marble. Caked my car. Guy tried to hose it off...ended up thickening it up. Spent a Sunday in the garage and cleaned the mess. Got a quote from a detailer friend and sent to stone guy.

He doesn't cut onsite anymore...

Clay bar took it off really quick. Supa smooth once gone.

The plumber said to send him a bill and he'll send a check.