My first attempt at rig rolling shots.

anthony @ eas · 10-28-2009, 06:38 PM

...and it looks like I'm in need of a lot of help.

Here are the final products:

Here is an original. I had to use WAY to much PS to make it look halfway decent.

I only had a short pole so I couldn't get the whole car in the frame. I'll go to Home Depot to get a longer one.

Some questions:

1. Is it possible to do this in bright daylight without a filter? I couldn't get any long exposure times even with f22 and ISO100. You must have to be driving ad 50mph+ to get any motion.

2. Is it better to push the car or drive it? I found the car to be sharper when pushed (the two I posted are being pushed at 1mph max), but the motion blur obviously wasn't as apparent.

So if you guys have any tips, tricks or criticisms let me know. Thanks guys.

radiantm3 · 10-28-2009, 06:46 PM

Definitely need a dark ND filter in the day time. I like to push the car for at least 10-15 seconds. No need to drive the car.

Be careful pushing the car too fast especially if the ground isn't completely smooth. My camera started bouncing a bit because I was pushing the car too fast and ended up putting a small dent in my roof. I'm sure the hood is a bit stronger though.

BillLee · 10-28-2009, 09:14 PM

what lens are you using?

1013mm · 10-29-2009, 02:06 AM

get a wider lens!!!!

anthony @ eas · 10-29-2009, 12:19 PM

I'm using an 18mm lens. It should be wide enough, but the pole I was using was only 4 feet long.

AllydNYC · 10-29-2009, 08:11 PM

Um on a side note, the second picture looks fucking awsome!

BillLee · 10-30-2009, 12:53 AM

have you read this article?
http://www.rigshots.com.au/howto1.ht..._shutter_speed

anthony @ eas · 10-30-2009, 12:15 PM

Quote:

Originally Posted by Bryan0102

what was your rig setup? im interested in this but dont want to spend too much cash.,,

I got everything from Amazon based on this list of items:
http://www.diyphotography.net/take-c...alized-car-rig

Quote:

Originally Posted by BillLee

have you read this article?
http://www.rigshots.com.au/howto1.ht..._shutter_speed

I haven't seen that one yet- thanks!

Teshi · 11-01-2009, 01:03 PM

Filters are the only way for daylight. Even at ISO50 @ f32, I have problems. A 10 stop ND filter would be awesome but need to be careful of vignetting on a UWA.

I would recommend pushing the car with the gearbox in neutral. Less vibration from the engine and only vibration should be from the road.

This was the original motion shot

Here it is finally edited

I had to use a composite of the stationary shot and the motion shot to bring back sharpness. If I had pushed, would have required WAY less editing.

JustXtreme · 11-02-2009, 12:56 PM

whats funny is on the 2nd shot you did a great job on the ps but you didn't clone out the reflection of the car in the bumper.

anthony @ eas · 11-02-2009, 02:28 PM

OK, looks like I need a filter. Something like this would probably work:
https://www.adorama.com/HY58PF.html

Teshi · 11-02-2009, 02:41 PM

Quote:

Originally Posted by anthony @ eas

OK, looks like I need a filter. Something like this would probably work:
https://www.adorama.com/HY58PF.html

If you get that, let me know how you get it. I would still rather just go for a 10 stop ND filter instead. Less chance of filter rotation and changing the exposure.

anthony @ eas · 11-02-2009, 03:06 PM

Quote:

Originally Posted by Teshi

If you get that, let me know how you get it. I would still rather just go for a 10 stop ND filter instead. Less chance of filter rotation and changing the exposure.

Could you post a link to one of those?

Teshi · 11-02-2009, 03:11 PM

Quote:

Originally Posted by anthony @ eas

Could you post a link to one of those?

Something along these lines.
https://www.adorama.com/BW62ND8XDP.html

anthony @ eas · 11-02-2009, 04:42 PM

^^ Cool- I might just go with the adjustable polarizing one for the versatility for now. If I do, I'll definitely post the results/feedback here.

Thanks for everyone's help guys!

10-28-2009, 06:38 PM	#1
anthony @ eas 318 Rep 3,635 Posts Drives: R56 Cooper S Join Date: May 2009 Location: 4015 E Leaverton Court, Anahiem, CA 92807 iTrader: (0)	My first attempt at rig rolling shots. ...and it looks like I'm in need of a lot of help. Here are the final products: Here is an original. I had to use WAY to much PS to make it look halfway decent. I only had a short pole so I couldn't get the whole car in the frame. I'll go to Home Depot to get a longer one. Some questions: 1. Is it possible to do this in bright daylight without a filter? I couldn't get any long exposure times even with f22 and ISO100. You must have to be driving ad 50mph+ to get any motion. 2. Is it better to push the car or drive it? I found the car to be sharper when pushed (the two I posted are being pushed at 1mph max), but the motion blur obviously wasn't as apparent. So if you guys have any tips, tricks or criticisms let me know. Thanks guys.
	Appreciate 0 Tweet Quote

10-28-2009, 06:46 PM	#2
radiantm3 Apex Everything! 1006 Rep 4,378 Posts Drives: 2007 Honda S2000, 2017 GT350 Join Date: Sep 2008 Location: Cedar Park, TX iTrader: (6) Garage List 2011 E92 M3 [9.35] 2014 BMW i3 [10.00]	Definitely need a dark ND filter in the day time. I like to push the car for at least 10-15 seconds. No need to drive the car. Be careful pushing the car too fast especially if the ground isn't completely smooth. My camera started bouncing a bit because I was pushing the car too fast and ended up putting a small dent in my roof. I'm sure the hood is a bit stronger though. __________________ 2011 E92 M3(Sold). 2007 Honda S2000 (Track Car). 2016 Cayman GT4 (Sold). 2017 Shelby GT350 (AKA Crowd Killer). My pet project: https://stickershift.com
	Appreciate 0 Quote

10-28-2009, 09:14 PM	#3
BillLee Major General 703 Rep 5,382 Posts Drives: E92 M3 Join Date: Oct 2007 Location: HTX iTrader: (21) Garage List 09 E92 M3 [9.00]	what lens are you using? __________________ Follow me on instagram: billy.by
	Appreciate 0 Quote

10-29-2009, 02:06 AM	#4
1013mm aka 1013MM 1310 Rep 9,545 Posts Drives: pokingly flush Join Date: Jan 2009 Location: Los Angeles / HK iTrader: (7) Garage List 2009 135i [8.26]	get a wider lens!!!! __________________ -John Project YOSHI Sale Thread
	Appreciate 0 Quote

10-29-2009, 12:19 PM	#5
anthony @ eas 318 Rep 3,635 Posts Drives: R56 Cooper S Join Date: May 2009 Location: 4015 E Leaverton Court, Anahiem, CA 92807 iTrader: (0)	I'm using an 18mm lens. It should be wide enough, but the pole I was using was only 4 feet long.
	Appreciate 0 Quote

10-29-2009, 08:11 PM	#6
AllydNYC Loading... 359 Rep 2,187 Posts Drives: 91' E30 318is Join Date: Apr 2008 Location: Location iTrader: (15) Garage List 1991 BMW 318is [0.00]	Um on a side note, the second picture looks fucking awsome!
	Appreciate 0 Quote

10-30-2009, 12:53 AM	#7
BillLee Major General 703 Rep 5,382 Posts Drives: E92 M3 Join Date: Oct 2007 Location: HTX iTrader: (21) Garage List 09 E92 M3 [9.00]	have you read this article? http://www.rigshots.com.au/howto1.ht..._shutter_speed __________________ Follow me on instagram: billy.by
	Appreciate 0 Quote

11-01-2009, 01:03 PM	#9
Teshi First Lieutenant 155 Rep 346 Posts Drives: Blue/Usually full of camera ge Join Date: Oct 2008 Location: Harrow - London iTrader: (0)	Filters are the only way for daylight. Even at ISO50 @ f32, I have problems. A 10 stop ND filter would be awesome but need to be careful of vignetting on a UWA. I would recommend pushing the car with the gearbox in neutral. Less vibration from the engine and only vibration should be from the road. This was the original motion shot Here it is finally edited I had to use a composite of the stationary shot and the motion shot to bring back sharpness. If I had pushed, would have required WAY less editing.
	Appreciate 0 Quote

11-02-2009, 12:56 PM	#10
JustXtreme Private 21 Rep 92 Posts Drives: White 128i Join Date: Oct 2009 Location: Lakeland Florida iTrader: (0)	whats funny is on the 2nd shot you did a great job on the ps but you didn't clone out the reflection of the car in the bumper.
	Appreciate 0 Quote

11-02-2009, 02:28 PM	#11
anthony @ eas 318 Rep 3,635 Posts Drives: R56 Cooper S Join Date: May 2009 Location: 4015 E Leaverton Court, Anahiem, CA 92807 iTrader: (0)	OK, looks like I need a filter. Something like this would probably work: https://www.adorama.com/HY58PF.html
	Appreciate 0 Quote

11-02-2009, 04:42 PM	#15
anthony @ eas 318 Rep 3,635 Posts Drives: R56 Cooper S Join Date: May 2009 Location: 4015 E Leaverton Court, Anahiem, CA 92807 iTrader: (0)	^^ Cool- I might just go with the adjustable polarizing one for the versatility for now. If I do, I'll definitely post the results/feedback here. Thanks for everyone's help guys!
	Appreciate 0 Quote