|
It's pretty straight forward. Remove the strut bars, remove the intake box and you will have to unscrew I believe the oil box or coolant (can't remember as I am not looking at the car). Just push this slightly to back and left.
The next step is unscrewing the clamps for the throttle bodies. Make sure to have a long screw driver in hand as they can be a little tough to get to, but conveniently located.
Slightly unscrew these and make sure you keep the clamps in a similar position when putting the manifold back on.
Next careful start pushing the manifold off of the throttle bodies and whala!!! It should come off. Those Screws in top of the manifold are not necessary to touch.
Email me if you have any questions. I'm sure all the guys on this site should be able to help you as well.
|