Quote:
Originally Posted by 540iSUP
I checked my coding and found some updates. I used Bimmercode Expert mode and noticed that the screens have changed since the last time I coded the rear fogs. Everything is still within BDC_Body2 Module.
I could not find NSL Verbaut
LCE_BEL_LIN_VAR: Change to match your existing switch, plus "NSL". For example, mine was "39_BEL_PL_FLC_NSW_NIVI", so I changed it to "40_BEL_PL_FLC_NSW_NSL_NIVI". This keeps the incorrect light switch variant error from showing up in ISTA.
LIC_LOG_LAMP_2_OUTPUT_CHANNEL_DATA: Change this to "G30_ECE_Code2"
LIC_LOG_LAMP_2_OUTPUT_CHANNEL_INDEX: Changed this to "G30_ECE_Code2"
LIC_NIVEAU_OVERRIDE_DATA_0: Change this to "G30_ECE_code2"
LIC_NIVEAU_OVERRIDE_INDEX: Change this to "G30_ECE_code2"
LIC_VERSION_DATA: Changed this to ( I forgot the exact code but it was the one that contained G30_ECE )
|
I forgot about this. Are yours now fully functional? Not going to have fog for a while but still would be nice to have setup.