I have successfully activated my Reverse camera with Front and Rear PDC retrofit using the European E9x PDC which is similar to e84 PDC.
Now I want to gain options line Parking like and Obstacles so I have bought f10 m5 single Fakra TRSVC and f10 reverse camera, and instead of cutting the handle I have built my own trunk handle with the f10 OEM camera, waiting oem wiring harness to arrive from Europe as well.
After making good research found out that f series TRSVC uses KCAN1 connection just like the E series and the camera module will 100% communicate with E series system.
My only dilemma was since the f series camera module has more updated SW than the E series and listed like SW:13.08.01 vs SW
03.06.01 on E84 TRSVC so was afraid that NCSExpert wont recognize the TRSVC, but If you got your TRSVC from f31 then mine 100% should work. HW numbers matches on both series and both has 10.02.00
Because my car is e93, I had purchased Satellite Unit with the bracket when I was doing the CIC retrofit and realized after that CIC came with built in SAT. So I have remove the SAT module and install the Camera Module on top, it is perfect location to install under the Matt using the SAT bracket.
Here is the current setup I have :
And this is the OEM Project :
TRSVC Location :
Fxx TRSVC KCAN 1 :
